Closed Amiga A600 + Apollo 630 + 32mb + 4GB CF + 2mb Chip + 3.1Rom

[fitzsteve]

Hi All,

After much thought I've decided to sell my fully upgraded A600, Its clear that I've overspent on this hobby and I need to cut back a little.

Much time and money had gone into this project so I really hope whoever buys it will enjoy the machine.

Here are the full specs:

C= Amiga A600, in nice white condition. The only imperfection is one of the clips on the bottom case is broken.
Apollo 630 Accelerator @33mhz + 32mb Simm + 68882FPU
Marpet 1mb Chip Ram upgrade (2mb Chip Ram total) + 3.1 Rom
Mika's Custom CF-IDE Adapter + 4GB Microdrive
Classic Workbench ADV is fully installed + Apps/Games/WHDLoad (Own key req)

The Apollo has a nice secure fit on this board and runs 100% stable

The Apollo will be removed for shipping as it is not fixed in place, its only clipped onto the chip and would come off during shipping.

Here are the prices:

If you take the whole A600 as above the price will be £425 (or a very near offer) + P&P (Will only send by a fully insured service)

This is for the main unit only, no Mouse/PSU/cables incuded.

If you would like just to buy the Apollo 630 I will accept £375 (or a very near offer) for this card. (Includes the full 030+MMU @33mhz + 68882FPU + 32mb Simm) P&P for just the Apollo in the UK will be £5.50 by Special Delivery. EU, etc will need a quote.

Here are the pics:








*Note the image on screen in this pic is from the A1200T*

As promised here are some new internal pics for prospective purchasers or those needing a Pr0n fix







Thanks for looking.

Steve.

[Jon Hare]

What a great setup!

I feel with you, mate. Selling such systems hurts in some way, doesn't it?

Good luck with the sale

[fitzsteve]

Thanks Jon, it sure does hurt my friend. Especially with the effort put into the builds but I'd be happy if it sold to a member here who will appreciate and enjoy it.

Steve.

[gavilan]

Amazing setup Steve!!! Its obivous that a lot of care, passion and love was put into this!!!
Really hope it goes to good hands!!!!

Sebastian
PS: say, in the last pic, where the A600 is opne, is that a heatsink? If so, for what chip? Just curios, since i never seen something like that before...

[fitzsteve]

Originally Posted by gavilan

Sebastian
PS: say, in the last pic, where the A600 is opne, is that a heatsink? If so, for what chip? Just curios, since i never seen something like that before...

Thanks for the kind words Sebastian =)

I put a heatsink on the 030 becuase I was told that the Apollo 630 gets very hot, but to be honest it only gets warm and too hot so I've since removed it.

Steve.

[Adix]

Hi Steve, Great setup I like your workbench look fab. Possible is buy from u cf with some or similar config? I am beginer for now with amiga WB.

[fitzsteve]

Originally Posted by Adix

Hi Steve, Great setup I like your workbench look fab. Possible is buy from u cf with some or similar config? I am beginer for now with amiga WB.

Hi Adix, if you want to send me a CF I can set it up for you as a favour, or I can talk you through it. PM me with the details on what Amiga you have and I'll let you know if it can run this setup.

Steve.

[davideo]

Originally Posted by fitzsteve

Hi Adix, if you want to send me a CF I can set it up for you as a favour, or I can talk you through it. PM me with the details on what Amiga you have and I'll let you know if it can run this setup.

Steve.

Steve,

Don't forget the copyright issues with WB

Dave G

[fitzsteve]

Originally Posted by davideo

Steve,

Don't forget the copyright issues with WB

Dave G

I know, classic workbench requires the original workbench disk for activation

I would just copy the CWB HDF contents to CF then it can be activated the other end with real disks.

Steve.

[fitzsteve]

Added internal pics